Panasonic Thermo Pot Features
Boil Setting Long boiling (4-minute chlorine-reduction) The long boil setting boils the water, continuously, for about four minutes to reduce chlorine content in tap water. Reboil setting Brings water to 100ºC again. Interior Exclusive Binchotan-type Charcoal Coating  PANASONIC is the first to use a Binchotan-type premium charcoal non-stick interior coating. This special coating results in a 10% improvement in the colour, taste, and aroma of the tea when brewed with water from the PANASONIC Electric Thermo Pot. You will be able to see, taste, and smell the difference that the Binchotan-type non-stick coating makes to your tea. The interior is also stain resistant, and can be easily cleaned. Cleaning mode To keep the thermo pot functioning at its best, keep it clean with lemon juice or package cleaners. Rotating body The rotating body design allows water to be poured out at a convenient position, regardless of the position of the Thermo Pot. Safe and easy-to-remove lid The lid can be easily removed. Simply lift it up while pushing the lever in the joint between the lid cover and the Thermo Pot body. 2-Step lid opening switch To prevent accidental opening of the lid, the Electric Thermo Pot has a 2-step lid-opening switch. More available water Thanks to the PANASONIC bottom heating system, the Electric Thermo Pot can hold up to five cups more water than conventional Thermo Pots. Economy timer Keeps water warm economically. The 6 and 10 hour economy timer can reduce the amount of electricity used. Overheating protection (Empty heating protection) Turns off the heater automatically if you attempt to boil water with less than the minimum volume of 0.3 litres (10-fl. oz.) of water. The "LongBoil/Reboil" and "Keep Warm" indicator lights flash alternate. Four keep warm temperature settings Keep coffee, tea, and noodles at the ideal temperature from 60ºC to 98ºC. Magnetic plug This safety feature helps to keep the entire unit from falling when the power cord gets caught. Built-in microprocessor The microprocessor system activates with distinctive beeping sounds to notify you of three different conditions: when water has completely boiled, when overheating is detected, and when the Thermo Pot is unplugged. A flashing light will notify you of these functions. Automatically locked dispense button For safety protection, the Dispense Button automatically locks approximately 10 seconds after dispensing hot water. Pressing the Lock/Unlock button and then the Dispense button allows water to be poured again.